Кориолисовый расходомер Proline Promass 80I

Однотрубный расходомер с прямой измерительной трубкой Promass I предназначен для применения в условиях, требующих малых потерь давления. В сочетании с доказавшим свою эффективность кнопочным преобразователем Promass 80 расходомер Promass 80I является эффективным решением для применения в условиях, требующих осторожного обращения с жидкостями.

The straight single?tube flowmeter with a compact or remote transmitter. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.

Energy?saving – full bore design enables minimal pressure loss. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space?saving installation – no in/outlet run needs. Straight, easy cleanable single?tube system. TMB technology.

Cost?effective – dedicated design for standard applications. Safe operation – display provides easy readable process information. Fully industry compliant – IEC/EN/NAMUR. 2?line backlit display with push buttons. Device in compact or remote version.

DN 8 to 80 (? to 3")

Measuring tube: Titanium grade 9
Connection: Titanium grade 2

Mass flow, density, temperature, volume flow, corrected volume flow, reference density

Mass flow (liquid): ±0.15 %
Volume flow (liquid): ±0.15 %
Mass flow (gas): ±0.5 %
Density (liquid): ±0.0005 g/cm?

0 to 180 000 kg/h (0 to 6600 lb/min)

PN 100, Class 600, 63K

–50 to +150 °C (–58 to +302 °F)

Standard: –20 to +60 °C (–4 to +140 °F)
Option: –40 to +60 °C (–40 to +140 °F)

1.4301/1.4307 (304L), corrosion resistant

Powder?coated die?cast aluminium
1.4301 (304), sheet
CF3M (316L), cast

IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure

2?line backlit display with push buttons
Configuration via local display and operating tools possible

3 outputs:
0?20 mA (active)/4?20 mA (active/passive)
Pulse/frequency/switch output (passive)

Status input

HART
PROFIBUS PA

DC 16 to 62 V
AC 85 to 260 V (45 to 65 Hz)
AC 20 to 55 V (45 to 65 Hz)

ATEX, IECEx, FM, CSA, NEPSI, TIIS

CE, C-tick, EAC marking

Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR

PED, CRN

3.1 material

3-A